D-Link DGS-1100-06/ME - Show Igmp_Snooping Group; Show Igmp_Snooping Forwarding

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
151
---- -------------------------------- -----------------------------------------
DGS-1100-06/ME:5#
show igmp_snooping group
Purpose
To display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 20>}
Description
The show igmp_snooping group command displays the current
IGMP snooping group configuration on the Switch.
Parameters
vlan <vlan_name 20> − The name of the VLAN for which IGMP
snooping group configuration information is to be displayed. Up to
20 characters can be used.
Restrictions
None.
Example usage:
To show igmp snooping group:
DGS-1100-06/ME:5#show igmp_snooping group vlan default
Command: show igmp_snooping group vlan default
Total Entries : 0
DGS-1100-06/ME:5#
Reports : 1
Port Member : 3,4
Total Entries : 1
DGS-1100-06/ME:5#
show igmp_snooping forwarding
Purpose
To display the IGMP snooping forwarding table entries on the
Switch.
Syntax
show igmp_snooping forwarding [all | vlan_name <string 20> |
vlanid <vidlist>]
Description
The show igmp_snooping forwarding command displays the
current IGMP snooping forwarding table entries currently configured
on the Switch.
Parameters
all − Specifies all IGMP snooping forwarding table information to be
displayed.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping forwarding table information is to be displayed. Up to 20
characters can be used.
vlanid <vidlist> − The vid of the VLAN for which IGMP snooping
forwarding table information is to be displayed.
Restrictions
None.