D-Link DGS-1100-06/ME - Show Mld_Snooping Group

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
163
Description
The show mld_snooping forwarding command displays the
current MLD snooping forwarding table entries currently configured
on the Switch.
Parameters
vlan_name <string 20> – Displays that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
Restrictions
None.
Example usage:
To display the MLD snooping forwarding:
DGS-1100-06/ME:5#show mld_snooping forwarding all
Command: show mld_snooping forwarding all
Total Entries : 0
DGS-1100-06/ME:5#
show mld_snooping group
Purpose
To display mld snooping group settings on the Switch.
Syntax
show mld_snooping group [vlan_name <string 20> | vlanid
<vidlist> | all | ports <portlist>]
Description
The show mld_snooping group command displays the multicast
groups that were learned by MLD snooping.
Parameters
vlan_name <string 20> – The name of the VLAN for which to view
the MLD snooping group configurations.
vlanid <vidlist> – The id of the VLAN for which to view the MLD
snooping group configurations.
all – Displays that all MLD snooping which configured for all VLANs
on the Switch.
ports <portlist> – The ports of the VLAN for which to view the MLD
snooping group configurations.
Restrictions
None.
Example usage:
To show the MLD snooping groups:
DGS-1100-06/ME:5#show mld_snooping group all
Command: show mld_snooping group all
Total Entries : 0
DGS-1100-06/ME:5#