D-Link DGS-1100-06/ME - Show 802.1 X Fwd_Pdu System Status

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
187
DGS-1100-06/ME:5# config 802.1x fwd_pdu system enable
Command: config 802.1x fwd_pdu system enable
Success!
DGS-1100-06/ME:5#
show 802.1x fwd_pdu system status
Purpose
Used to display the forwarding of EAPOL status on the Switch.
Syntax
show 802.1x fwd_pdu system status
Description
Th show 802.1x fwd_pdu system status command displays the
forwarding of EAPOL status on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator–level users can issue this command.
Example usage:
To display the forwarding of EAPOL status on the Switch:
DGS-1100-06/ME:5# show 802.1x fwd_pdu system status
Command: show 802.1x fwd_pdu system status
PNAC control packet (eap) is forwarding....
Success!
DGS-1100-06/ME:5#