D-Link DGS-1100-06/ME - Config Mcast_Filter_Profile; Config Mcast_Filter_Profile Ipv6

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
168
profile on the Switch.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To create an IPv6 multicast filtering profile on the Switch:
DGS-1100-06/ME:5#create mcast_filter_profile ipv6 profile_id 1 profile_name
rd2
Command: create mcast_filter_profile ipv6 profile_id 1 profile_name rd2
Success.
DGS-1100-06/ME:5#
config mcast_filter_profile
Purpose
To configure multicast filtering profile on the Switch.
Syntax
config mcast_filter_profile [profile_id <integer 1-24> |
profile_name <string 32>] [add | delete] <ipaddr>
Description
The config mcast_filter_profile command displays the multicast
filtering profiles settings.
Parameters
profile_id <integer 1-24> - Specify the profile id to be added or
deleted for the multicast filter.
profile_name <string 32> - The name of the VLAN on which the
MAC address resides.
[add | delete] – Add or delete the profile id which user specified.
<ipaddr> – Specify the range of IPv4 address.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To add the multicast address range 225.1.1.1 to 225.1.1.10 to the profile on the Switch:
DGS-1100-06/ME:5#config mcast_filter_profile profile_id 3 add 225.1.1.1
225.1.1.10
Command: config mcast_filter_profile profile_id 3 add 225.1.1.1 225.1.1.10
Success.
DGS-1100-06/ME:5#
config mcast_filter_profile ipv6
Purpose
To configure IPv6 multicast filtering profile on the Switch.
Syntax
config mcast_filter_profile ipv6 [profile_id <integer 1-24> |
profile_name <string 32>] [add | delete] <ipv6addr>
Description
The config mcast_filter_profile ipv6 command is used to add or
delete a range of IPv6 multicast addresses to the profile
Parameters
profile_id <integer 1-24> - Specify the profile id to be added or
deleted for the multicast filter.
profile_name <string 32> - The name of the VLAN on which the
MAC address resides.