D-Link DGS-1100-06/ME - Show Command_History

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
211
DGS-1100-06/ME:5#?
Command: ?
?
cable diagnostic port
clear arptable
clear counters
clear ethernet_oam ports
clear flood_fdb
clear igmp_snooping statistics counter
clear log
clear mld_snooping statistics counter
config 802.1x auth_mode ports
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x fwd_pdu system
config 802.1x guest_vlan ports
config 802.1x init port_based ports
config 802.1x reauth port_based ports
config account
config admin local_enable
config arp_aging time
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL
show command_history
Purpose
To display the command history.
Syntax
show command_history
Description
The show command_history command displays the command
history.
Parameters
None.
Restrictions
None.
Example usage:
To display the command history:
DGS-1100-06/ME:5#show command_history
Command: show command_history
?
show log
show log_save_timing
show log_save_timing
DGS-1100-06/ME:5#