D-Link DGS-1100-06/ME - Config Sysname; Config Syslogintimeout; Enable Snmp

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
57
DGS-1100-06/ME:5#config syslocation HQ5F
Command: config syslocation HQ5F
Success.
DGS-1100-06/ME:5#
config sysname
Purpose
To define the name for the Switch.
Syntax
config sysname <string 20>
Description
The config sysname command defines the name of the Switch.
Parameters
<string 20> - A maximum of 20 characters is allowed.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the Switch name as ‘28ME’:
DGS-1100-06/ME:5#config sysname 28ME
Command: config sysname 28ME
Success.
DGS-1100-06/ME:5#
config syslogintimeout
Purpose
To define the login timout for the Switch.
Syntax
config syslogintimeout <integer 3-30>
Description
The config syslogintimeout command defines the login timeout of
the Switch.
Parameters
<integer 3-30> - Specifies the login timeout. The range is from 3-30
minutes.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To configure the login timeout to 30 minutes:
DGS-1100-06/ME:5# config syslogintimeout 30
Command: config syslogintimeout 30
Success.
DGS-1100-06/ME:5#
enable snmp
Purpose
To enable SNMP support.
Syntax
enable snmp