D-Link DGS-1100-06/ME - Show Router_Port

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
154
configured on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To clear the IGMP snooping statistic counter table on the Switch:
DGS-1100-06/ME:5# clear igmp_snooping statistics counter
Command: clear igmp_snooping statistics counter
Success !
DGS-1100-06/ME:5#
show router_port
Purpose
To display the currently configured router ports on the Switch.
Syntax
show router_port {vlan <vlan_name 20> | static | dynamic}
Description
The show router_port command displays the router ports currently
configured on the Switch.
Parameters
vlan <vlan_name 20> − The name of the VLAN on which the router
port resides. Up to 32 characters can be used.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically learned.
forbidden − Displays router ports that have been forbidden
configured.
Restrictions
None.
Example usage:
To display the router ports.
DGS-1100-06/ME:5#show router_ports
Command: show router_ports
VLAN Name : default
Static router port :
Dynamic router port :
Forbidden router port :
Total Entries : 1
DGS-1100-06/ME:5#