D-Link DGS-1100-06/ME - Config Management Vlan; Show Management Vlan; Show Port_Vlan Pvid

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
129
config management vlan
Purpose
To configure the management VLAN on the Switch.
Syntax
config management vlan <string 32>
Description
The config management vlan command configures the
management VLAN on the Switch.
Parameters
<string 32> − Specifies the management VLAN name on the Switch.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure the management VLAN on the switch:
DGS-1100-06/ME:5#config management vlan default
Command: config management vlan default
success
DGS-1100-06/ME:5#
show management vlan
Purpose
To display the management VLAN on the Switch.
Syntax
show management vlan
Description
The show management vlan command displays the management
VLAN information on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the management VLAN on the switch:
DGS-1100-06/ME:5#show management vlan
Command: show management vlan
management vlan is enable
management vlan id : 1
management vlan name: default
DGS-1100-06/ME:5#
show port_vlan pvid
Purpose
To display the port PVID of VLAN on the Switch.
Syntax
show port_vlan pvid
Description
The show port_vlan pvid command displays the port PVID of
VLAN on the Switch.
Parameters
None.
Restrictions
None.