D-Link DGS-1100-06/ME - Enable Igmp_Snooping; Disable Igmp_Snooping

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
141
Command
Parameter
multicast_vlan_group
show igmp_snooping
group
{vlan <vlan_name 20>}
show igmp_snooping
forwarding
[all | vlan_name <string 20> | vlanid <vidlist>]
show igmp_snooping
host
{group <ipaddr> | ports <portlist> | vlan_name <string20>}
show igmp_snooping
statistic counter
[vlan_name <string 20> | vlanid <vidlist> | ports <portlist> | all]
clear igmp_snooping
statistic counter
show router_port
{vlan <vlan_name 20> | static | dynamic}
Each command is listed in detail, as follows:
enable igmp_snooping
Purpose
To enable IGMP snooping on the Switch.
Syntax
enable igmp_snooping {forward_mcrouter_only}
Description
The enable igmp_snooping command enables IGMP snooping on
the Switch.
Parameters
{forward_mcrouter_only} − Enables the forward mcrouter only for
IGMP Snooping on the Switch.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To enable IGMP snooping on the Switch:
DGS-1100-06/ME:5# enable igmp_snooping
Command: enable igmp_snooping
Success !
DGS-1100-06/ME:5#
disable igmp_snooping
Purpose
To disable IGMP snooping on the Switch.
Syntax
disable igmp_snooping {forward_mcrouter_only}
Description
The disable igmp_snooping command disables IGMP snooping on
the Switch.
Parameters
{forward_mcrouter_only} − Disables the forward mcrouter only for
IGMP Snooping on the Switch.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To disable IGMP snooping on the Switch: