D-Link DGS-1100-06/ME - Show Mld Snooping; Show Mld_Snooping Forwarding

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
162
show mld snooping
Purpose
To display mld snooping settings on the Switch.
Syntax
show mld snooping [vlan_name <string 20> | vlanid <vidlist> |
all]
Description
The show mld snooping command displays a port from being
defined as a multicast router port by static configuration or by
automatic learning.
Parameters
vlan_name <string 20> – Displays that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – Displays that the mld snooping applies only to this
previously created VLAN id.
all – Displays that MLD snooping which configured for all VLANs on
the Switch.
Restrictions
None.
Example usage:
To show the MLD snooping:
DGS-1100-06/ME:5# show mld_snooping vlanid 1-3
Command: show mld_snooping vlanid 1-3
MLD Snooping Global State : Enable
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 2
Querier State : Disable
Querier Role : Non-Querier
Querier Select : Enable
Querier IP :
Querier Expiry Time : 0
State : Enable
Fast Leave : Enable
Version : 2
Total Entries : 1
DGS-1100-06/ME:5#
show mld_snooping forwarding
Purpose
To display mld snooping settings on the Switch.
Syntax
show mld_snooping forwarding [vlan_name <string 20> | vlanid
<vidlist> | all]