D-Link DGS-1100-06/ME - Page 118

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
106
Description
The config traffic trap command configures the current storm traffic
trap configuration on the Switch.
Parameters
storm_cleared – A notification will be generated when a storm event
is cleared.
storm_occured – A notification will be generated when a storm event
is detected.
both – A notification will be generated both when a storm event is
detected and cleared.
none – No notification will be generated when storm event is
detected or cleared.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To configure traffic trap setting:
DGS-1100-06/ME:5#config traffic trap storm_cleared
Command: config traffic trap storm_cleared
Success.
DGS-1100-06/ME:5#