DEQX User Manual
IMPORTANT INFORMATION
DISCLAIMER AND LIMITATION OF LIABILITY
DEQX Pty. Ltd. (‘DEQX’) assumes no responsibility for loss or damage resulting from the use of
any of its products.
Refer to the license supplied with the DEQX® Calibration software (pages 3 and 4).
Specifications are subject to change without notice.
Contact DEQX Support at http://deqx.com/support.php for installation and operational support.
We highly recommend using the DEQXpert™ on-line installation and/or training service.
The exclamation point within a triangle is intended to alert the user to the
presence of important operating and maintenance instructions in the
literature accompanying the product.
The lightning with arrowhead symbol within a triangle is intended to alert
the user to the presence of un-insulated “dangerous voltage” within the
products’ enclosure that may be of sufficient magnitude to constitute a risk
of electrical shock to person.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical
shock, do not open the unit. No user-serviceable parts are inside. Refer any servicing to qualified
personnel.
Caution: Damage may result to your speaker drivers and other equipment if your audio system is
connected incorrectly or if the unit is used incorrectly. Read this user manual in full before
configuring your hardware and refer to your speaker manufacturer's specifications to ensure
correct connection. If you are in doubt as to as the connection of your audio equipment, seek
assistance from a professional audio installer or contact DEQX at http://deqx.com/support.php.
ALWAYS TURN THE DEQX UNIT AND ANY ASSOCIATED AUDIO EQUIPMENT
OFF BEFORE CONNECTING OR DISCONNECTING AUDIO CABLES.
ANY AUDIO EQUIPMENT REQUIRING GROUNDING MUST BE GROUNDED TO
THE SAME POINT (CIRCUIT) AS THE DEQX UNIT.
FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN DAMAGE TO THE
DEQX UNIT AND OTHER AUDIO EQUIPMENT AND MAY NOT BE COVERED BY
WARRANTY.
To Next Page
Loading...