DEQX User Manual
Settings screen
The Settings screen provides two functions:
Update
This button updates the touchscreen display firmware. Insert a USB stick
containing the DEQX-supplied firmware update, and then press the Update
button.
Reset
This button resets the touchscreen display drivers. It can be used on the advice of
DEQX Support in the event of specific operational issues with the unit.
3.6 SPECIAL STATUS INDICATORS
The front panel LEDs indicate special status, as follows.
All LEDs are yellow
No filter profiles have been loaded into the DEQX.
All LEDs blinking blue
The DEQX has been booted into safe mode. See page 167.
All LEDs turned on in a combination of red, blue and yellow
The DEQX has entered fault mode. See page 170.
To Next Page
Loading...