11 SUBWOOFER INTEGRATION
To integrate subwoofers means to ensure that they are correctly time-aligned with the
main speakers and matched in level. While this manual presents subwoofer integration
before room EQ, it is also possible to do it afterward once you are familiar with the
operations involved. In either case, the final subwoofer level is a result of listening to a
variety of program material.
If you are not using subwoofers, skip this chapter.
11.1 VIEW THE ROOM MEASUREMENT
Open the most recent room measurement taken at the center of the listening area. The
screenshot below shows a typical example with stereo subwoofers. (If you left “View
room measurement in IO Manager / parametric EQ” checked on the exit screen of the
room measurement wizard, this window will already be open.)
To Next Page
Loading...