Dionex As - Page 339

Doc. 065051-03 1/08 Index-1
Index
Numerics
1.2 mL sampling needle assembly, 18
8.5 mL sampling needle assembly, 18
A
A DIRECT CONTROL command was received
while the sampler door is open., 123
A failure has occurred during power-up, 107
A NAK command was received, 112
Aborting a schedule, 10, 276
Absolute vial position, 237
Accuracy
Improving for partial-loop injections, 74
Adding timed events steps, 295
Aligning the inject port, 151
Aligning the sampling needle, 151
Aluminum vial tray, 19
Ambient operating temperature, 175
An attempt was made to move a syringe valve,
110
An attempt was made to move the syringe, 110
An attempt was made to set an illegal syringe
speed, 110
An attempt was made to use the sample prep
syringe, 108
An illegal vial number was specified, 111
An injection was skipped because of a problem
in the autosampler, 123
Anion (example QNT Method), 225
Arrow buttons, 11
Aspirate syringe speed, 94
Audit Trail
Error messages, 105
Automatically flushing the inject port, 41
Autosampler compartment, 8
Features illustrated, 14
B
Backlight, 228, 248
Backpressure
Calculating, 97
Calculation example, 98 – 99
Guidelines for controlling, 97
Maximum allowed, 24
Batch (Chromeleon/Chromeleon Xpress), 54
Battery, 127
Battery backed up RAM failed, 113
Beeping when key is pressed, 248
BIOS code revision level, 260
Blank screen, 228, 248
Bubbles
Removing from the syringe, 134, 218
Buttons
Cursor arrows, 11
Delete, 10
Enter, 11
Help, 11, 13
Hold/Run, 10
Home, 10
Insert, 10
Menu, 11
Numeric, 11
Select, 11
Stop, 10
C
Cables
Syringe, 189
USB, 204
Calibration
Inject port volume, 155
Leak sensor, 162, 270
Calibration standards, 16