C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 88 –
Green Ethernet Adjusts the power provided to ports based on the length of the cable
used to connect to other devices
156
RSPAN Mirrors traffic from remote switches for analysis at a destination
port on the local switch
134
Traffic Segmentation 158
Configure Global Enables traffic segmentation globally 158
Configure Session Configures the uplink and down-link ports for a segmented group of
ports
159
VLAN Trunking Allows unknown VLAN groups to pass through the specified
interface
161
VLAN Virtual LAN 165
Static
Add Creates VLAN groups 168
Show Displays configured VLAN groups 168
Modify Configures group name and administrative status 168
Edit Member by VLAN Specifies VLAN attributes per VLAN 170
Edit Member by Interface Specifies VLAN attributes per interface 170
Edit Member by Interface Range Specifies VLAN attributes per interface range 170
Dynamic
Configure General Enables GVRP VLAN registration protocol globally 175
Configure Interface Configures GVRP status and timers per interface 175
Show Dynamic VLAN 175
Show VLAN Shows the VLANs this switch has joined through GVRP 175
Show VLAN Member Shows the interfaces assigned to a VLAN through GVRP 175
Tunnel IEEE 802.1Q (QinQ) Tunneling 178
Configure Global Sets tunnel mode for the switch 182
Configure Interface Sets the tunnel mode for any participating interface 183
Protocol 184
Configure Protocol 185
Add Creates a protocol group, specifying supported protocols 185
Show Shows configured protocol groups 185
Configure Interface 187
Add Maps a protocol group to a VLAN 187
Show Shows the protocol groups mapped to each VLAN 187
IP Subnet 189
Add Maps IP subnet traffic to a VLAN 189
Show Shows IP subnet to VLAN mapping 189
Table 6: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General