iPECS-LIK
Feature Description & Operation Manual
To define the User Custom Text Message (00)
1. Press the [PGM] button.
2. Dial “52”, the Custom Message program code.
3. Enter the Message contents, up to 24 characters using 2 dial pad digits for each
character.
4. Press the [SAVE] button, confirmation tone is received, the new User Custom Text
Display Message is stored and the station returns to idle.
SLT
To activate a Display Message
1. Lift handset.
2. Dial “561”, the SLT Programming code.
3. Dial “51”, the Display Message code.
4. Dial Message number (“00”-“20”).
5. Dial auxiliary data as desired.
6. Momentarily press the hook-switch, confirmation tone is received.
To cancel an active Display Message
1. Lift the handset.
2. Dial “559”, the SLT Feature Cancel code.
To enter the User Custom Message (00)
1. Lift the handset.
2. Dial “561”, the SLT Programming code.
3. Dial “52”, the Custom Message program code, confirmation is received.
4. Enter the Message contents, up to 24 characters.
5. Momentarily press the hook-switch, confirmation tone is received.
System Attendant
To activate Display Messages for other stations
1. Press the [PGM] button.
2. Dial “051”, Attendant Display Message code.
3. Dial station range.
4. To view available messages, press [VOL UP]/[VOL DOWN] button.
5. Dial Message number (“00”-“20”).
6. Dial auxiliary data as desired.
7. Press the [SAVE] button.
To cancel active Display Messages for other stations
1. Press the [PGM] button.
2. Dial “052”, Attendant Display Message Cancel code.
3. Dial station range.
4. Press the [SAVE] button.
To enter a Custom Message
1. Press the [PGM] button.
2. Dial “053”, the Custom Message program code.
3. Dial desired Message code (“11”-“20”).
To Next Page
Loading...