Ericsson iPECS-100 - Page 437

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
392
Step 3) Start Up SIP Server : connect COM1 and enter into maintenance mode, and
type maint> sipstack start
// “SIP stack:start(kill/start/refresh)” will be displayed
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
CONFTYPE
Mandatory, select one of Ericsson-LG
Enterprise SIP Phone type
Private MAC
Specify MAC address of a SIP Phone to
serve private provisioning for a Extension.
For common provisioning for all of
CONFTYPE SIP Extensions, do not specify
MAC address
Registration Timer
Re-Registration Timer
Local UDP Port
SIP Phone default signaling UDP port
Local TCP Port
SIP Phone default signaling TCP port
Local TLS Port
SIP Phone default signaling TLS port
Local RTP Port
SIP Phone default RTP port start range
Proxy Port
SIP Server port for SIP Phones (MFIM SIP
Port number)
Transport
Default signaling method
CODEC
1st. priority ~ 5th. priority
CODEC priority
NTP Setting (Need for TLS)
NTP Server Address
NTP server IP address.
NTP Interval
Interval
NTP Time Zone
Time Zone
DST Usage
Daylight Saving Time
DSP Setting
Speaker Volume
Default volume level of SIP Phone
Handset Volume
Default volume level of SIP Phone
Headset Volume
Default volume level of SIP Phone
MAX Handset Volume
Default volume level of SIP Phone
Digit Map
Dial Tone Digit
Second Dial Tone digit specification in SIP
Phone
Pause Timer
Dial Pause timer in SIP Phone
Digit Map
Send setup to system numbering plan