FS TAP Series User Manual

TAP Series Switch Command Line Reference
53
Use an IPv4 address and an IPv4 address
wildcard to specify a network (e.g.
192.168.1.1 0.0.0.255). If a bit in wildcard is 0
means this bit needs to check, otherwise this
bit should be ignored.
Use the parameter “host” and an IPv4 address
to specify an exactly address.
Use the parameter
“
any
”
to indicate packets
with any source IPv4 address value can match
this rule.
dst-ip ( IP_ADDR IP_ADDR_WILD | any | host
IP_ADDR )
Specify the destination IPv4 address of the
inner-match rule.
Use an IPv4 address and an IPv4 address
wildcard to specify a network (e.g.
192.168.1.1 0.0.0.255). If a bit in wildcard is 0
means this bit needs to check, otherwise this
bit should be ignored.
Use the parameter “host” and an IPv4 address
to specify an exactly address.
Use the parameter
“
any
”
to indicate packets
with any destination IPv4 address value can
match this rule.
src-ipv6 ( IPv6_ADDR IPv6_ADDR_WILD | any |
host IPv6_ADDR )
Specify the source IPv6 address of the inner-
match rule.
Use an IPv6 address and an IPv6 address
wildcard to specify a network. If a bit in
wildcard is 0 means this bit needs to check,
otherwise this bit should be ignored.
Use the parameter “host” and an IPv6 address
to specify an exactly address.
Use the parameter “any” to indicate packets
with any source IPv6 address value can match
this rule.
dst-ipv6 ( IPv6_ADDR IPv6_ADDR_WILD | any
| host IPv6_ADDR )
Specify the destination IPv6 address of the
inner-match rule.
Use an IPv6 address and an IPv6 address
wildcard to specify a network. If a bit in
wildcard is 0 means this bit needs to check,
otherwise this bit should be ignored.
Use the parameter “host” and an IPv6 address
to specify an exactly address.
Use the parameter “any” to indicate packets
with any destination IPv6 address value can
match this rule.
flow-label ( FLOW_LABEL LABEL_WILD | any )
Specify the IPv6 Flow label of the inner-match
rule.
Valid range for flow label is 0-1048575. Valid
range for flow-label wildcard bits is 0x0-
0xFFFFF

FS TAP Series Specifications

General

Brand	FS
Model	TAP Series
Category	Switch
Language	English