Fujitsu N7100

4.18 Setting a Job Sequence
195
7. Set a job item.
8. If [e-Mail] is selected for the job item in Step 7, perform settings related
to sending e-mail.
For details about setting values, refer to "5.4 Sending the Scanned Data by e-Mail"
(page 230).
HINT
Up to ten items can be set.
HINT
 Press the [Browse] button to set a different e-mail address from the [LDAP List] window.
To filter the LDAP List, refer to "Filtering the LDAP List" (page 200) for more details.
 Press the [Name Format] button to specify a file name on the [File Names (e-Mail)]
window. For details about setting values, refer to "4.11.4 Setting a File Name Format
for When Attaching Scanned Data to e-Mail" (page 129).