4.18 Setting a Job Sequence
196
9. If [Fax] is selected for the job item in Step 7, perform settings related to
sending a fax.
For details about setting values, refer to "5.5 Sending the Scanned Data by Fax"
(page 244).
10. If [Print] is selected for the job item in Step 7, perform settings related to
printing.
For details about setting values, refer to "5.6 Printing the Scanned Data" (page
252).
11. If [Save] is selected for the job item in Step 7, perform settings related to
saving.
For details about setting values other than those for a [Save process results file],
refer to "5.7 Saving the Scanned Data to a Network Folder" (page 262).
Process results files are formatted as follows:
Process results files are in an XML format.
HINT
Press the [Browse] button to set a different e-mail address from the [LDAP List] window.
To filter the LDAP List, refer to "Filtering the LDAP List" (page 200) for more details.
HINT
Press the [Browse] button to set the network printer from the [Printer List] window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
