RX1330 M3 Upgrade and Maintenance Manual 141
Hard disk drive (HDD) / solid state drive (SSD)
7.2 2.5-inch HDD/SSD configurations
7.2.1 Equipping the 2.5-inch HDDs/SSDs
– SSDs are always equipped before installing HDDs.
– If only one HDD/SSD module is installed, the HDD/SSD module will be
installed in position 1. Free bays must be equipped with a dummy module.
7.2.2 Configuration with up to four HDD/SSD modules
Figure 59: Configuration with up to four 2.5-inch HDDs/SSDs
The HDD/SSD numbering as listed in the ServerView RAID Manager:
Position Logical drive number ServerView RAID Manager display name
[0] 0 Vendor Product (0)
[1] 1 Vendor Product (1)
[2] 2 Vendor Product (2)
[3] 3 Vendor Product (3)
To Next Page
Loading...
