Fujitsu PRIMERGY RX1330 M3

228 Upgrade and Maintenance Manual RX1330 M3
Main memory
10.3 Removing a memory module
10.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
10.3.2 Removing a memory module
Figure 143: Installing a memory module
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
Figure 144: Installing a memory module
Ê Remove the ejected memory module.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less