Fujitsu PRIMERGY RX1330 M3

114 Upgrade and Maintenance Manual RX1330 M3
Power supply unit (PSU)
6.3.2.1 Preliminary steps
No steps needed.
6.3.2.2 Removing a hot-plug PSU
Ê Remove the power cord from the dedicated PSU as described in section
"Disconnecting the power cord" on page 54 .
Figure 34: Unlocking and removing the hot-plug PSU
Ê Push the handle of the PSU halfway upward in the direction of the arrow (1).
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the PSU in the direction of the arrow (3).
V CAUTION!
Never leave the bay for the PSU empty. Install a new PSU or install the
dummy cover.