RX1330 M3 Upgrade and Maintenance Manual 221
Expansion cards and backup units
9.5.3.3 Installing the new FBU
Ê Install the FBU in the holder and connect the FBU adapter cable to the FBU
as described in section "Preparing the FBU" on page 214.
Ê Install the FBU with the holder as described in section "Installing the FBU"
on page 216.
9.5.3.4 Concluding steps
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Updating expansion card firmware" on page 82
To Next Page
Loading...
