RX1330 M3 Upgrade and Maintenance Manual 179
8Fans
Safety notes
V CAUTION!
● Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
● Devices inside the server remain hot after shutdown. Wait for a while
after shutdown before installing or removing internal options.
● The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
● Do not touch the circuitry on boards or soldered parts. Hold the
metallic areas or the edges of the circuit boards.
● If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
● The installation indicated on this note is sometimes changed to the
kind of possible options without notice.
● For further safety information, please refer to chapter "Important
information" on page 35.
To Next Page
Loading...
