EasyManua.ls Logo

Fujitsu PRIMERGY RX1330 M3

Fujitsu PRIMERGY RX1330 M3
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
174 Upgrade and Maintenance Manual RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
7.3.4.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Locating the defective component" on page 51
7.3.4.2 Removing the defective 3.5-inch HDD module
Ê Remove the HDD module as described in section "Removing a 3.5-inch
HDD module" on page 172.
Ê If applicable, remove the HDD from the installation frame as described in
section "Handling HDDs or SSDs without installation frame" on page 135.
7.3.4.3 Installing the new 3.5-inch HDD module
Ê If applicable, install the HDD in the installation frame as described in section
"Handling HDDs or SSDs without installation frame" on page 135.
Ê Install the HDD module as described in section "Installing a 3.5-inch HDD
module" on page 170.
7.3.4.4 Concluding steps
Ê "Performing a RAID array rebuild" on page 96

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M3

Related product manuals