Fujitsu PRIMERGY RX1330 M3

248 Upgrade and Maintenance Manual RX1330 M3
Accessible drives
12.2 Optical disk drive (ODD)
12.2.1 Installing the ODD
12.2.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
12.2.1.2 Removing the dummy cover
Figure 159: Removing the dummy cover
Ê Pull the dummy cover out of the bay.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver