168 Upgrade and Maintenance Manual RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
7.3 3.5-inch HDD configurations
7.3.1 Equipping the 3.5-inch HDDs
– If only one HDD module is installed, the HDD module will be installed in the
left bay (seen from the front) and dummy modules must be installed in the
free bays.
– Installing different capacities, install the biggest capacity first.
– Installing different rotating speed, install the fastest rotating speed first.
Figure 88: Configuration with up to four 3.5-inch HDDs
The HDD/SSD numbering as listed in the ServerView RAID Manager:
Position Logical drive number ServerView RAID Manager display name
[0] 0 Vendor Product (0)
[1] 1 Vendor Product (1)
[2] 2 Vendor Product (2)
[3] 3 Vendor Product (3)
To Next Page
Loading...
