Fujitsu PRIMERGY RX1330 M3

RX1330 M3 Upgrade and Maintenance Manual 229
Main memory
10.3.3 Concluding steps
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 95
10.4 Replacing a memory module
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
Ê "Locating the defective component" on page 51
10.4.2 Removing the defective memory module
Ê Remove the memory module as described in section "Removing a memory
module" on page 228.
10.4.3 Installing the new memory module
Ê Install the memory module as described in section "Installing a memory
module" on page 226.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less