RX1330 M3 Upgrade and Maintenance Manual 293
System board and components
14.4.3.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the defective system board" on page 305
14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 288.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.4.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM as described in section "Installing the TPM" on page 286.
14.4.3.4 Concluding steps
Ê Reinstall the system board as described in section "Installing the new
system board" on page 307.
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 95
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
To Next Page
Loading...
