150 Upgrade and Maintenance Manual RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
7.2.7.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Locating the defective component" on page 51
7.2.7.2 Removing the defective 2.5-inch HDD/SSD module
Ê Remove the HDD/SSD module as described in section "Removing 2.5-inch
HDD/SSD modules" on page 147.
Ê If applicable, remove the HDD/SSD from the installation frame as described
in section "Handling HDDs or SSDs without installation frame" on page 135.
7.2.7.3 Installing the new 2.5-inch HDD/SSD module
Ê If applicable, install the HDD/SSD in the installation frame as described in
section "Handling HDDs or SSDs without installation frame" on page 135.
Ê Install the HDD/SSD module as described in section "Installing 2.5-inch
HDD/SSD modules" on page 144.
7.2.7.4 Concluding steps
Ê "Performing a RAID array rebuild" on page 96
To Next Page
Loading...
