RX1330 M3 Upgrade and Maintenance Manual 281
System board and components
Figure 194: Tools for breaking the UFM
Figure 195: UFM breaking method
Ê Use a flat nose pliers and a combination pliers to break the UFM in
half as shown in the figure.
14.3.2.3 Concluding steps
Ê Install the riser module 3 as described in section "Installing a riser module"
on page 68.
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 95
To Next Page
Loading...
