RX1330 M3 Upgrade and Maintenance Manual 55
Basic hardware procedures
4.4 Getting access to the component
V CAUTION!
● Only for non-hot plug components:
Before removing or attaching covers, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power
cords from the outlet. Failure to do so can cause electric shock.
● The top cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
● For further safety information, please refer to chapter "Important
information" on page 35.
To Next Page
Loading...
