Fujitsu PRIMERGY RX1330 M3

RX1330 M3 Upgrade and Maintenance Manual 63
Basic hardware procedures
4.5.3 Sliding the server into the rack
Figure 9: Sliding the server into the rack
Ê Release the locking mechanism of both rails (1).
Ê Push the server as far as it will go into the rack (2) until the quick-release
levers engage (3).
V CAUTION!
Be careful with your fingers. You can pinch them when the quick-
release levers change to the release position.
Ê Reconnect all cables except the power cord to the server rear.
햲
햴
햲
햲
햳
햳
햴
햴
햴
햴
햴
햴
햴
햴
햴
햴
햴
햴
햴
햴