Fujitsu PRIMERGY RX1330 M3

RX1330 M3 Upgrade and Maintenance Manual 105
Power supply unit (PSU)
6.2 Standard power supply
6.2.1 Replacing the standard PSU
6.2.1.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
6.2.1.2 Removing the defective standard PSU
Figure 21: Disconnecting the power cables
Ê Disconnect the two power cables from the system board connectors "PC98"
and "PWR1".
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver