EasyManua.ls Logo

Fujitsu PRIMERGY RX1330 M3

Fujitsu PRIMERGY RX1330 M3
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
146 Upgrade and Maintenance Manual RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
Figure 65: Installing the 2.5-inch HDD/SSD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever to lock the HDD in place (2).
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
7.2.5.4 Concluding steps
No steps needed.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX1330 M3

Related product manuals