284 Upgrade and Maintenance Manual RX1330 M3
System board and components
14.3.3.4 Concluding steps
Ê Install the riser module 3 as described in section "Installing a riser module"
on page 68.
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 95
14.3.3.5 Software configuration
I To install the ESXi to the USB Flash Module (UFM) refer to "Software
configuration" on page 278.
To Next Page
Loading...
