RX1330 M3 Upgrade and Maintenance Manual 163
Hard disk drive (HDD) / solid state drive (SSD)
7.2.10 Replacing the SAS expander board
7.2.10.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
7.2.10.2 Removing the defective SAS expander board
Ê Remove the SAS expander board as described in section "Removing the
SAS expander board" on page 157.
7.2.10.3 Installing the new SAS expander board
Ê Install the SAS expander board as described in section "Installing the SAS
expander board" on page 160.
7.2.10.4 Concluding steps
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
