RX1330 M3 Upgrade and Maintenance Manual 255
12.2.2.4 Concluding steps
Ê "Reassembling" on page 60
Ê "Connecting the power cord" on page 64
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 95
12.2.3 Replacing the ODD
12.2.3.1 Preliminary steps
Ê "Locating the defective server" on page 50
Ê "Removing backup and optical disk media" on page 74
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 53
Ê "Disconnecting the power cord" on page 54
Ê "Getting access to the component" on page 55
12.2.3.2 Removing the defective ODD
Ê Remove the ODD as described in section "Removing the ODD" on
page 252.
12.2.3.3 Installing the new ODD
Ê Install the ODD as described in section "Installing the ODD" on page 249.
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
To Next Page
Loading...
