Fujitsu PRIMERGY RX200 S8 - Configuration with up to Four HDD;SSD Modules; Configuration with up to Eight HDD;SSD Modules

RX200 S8 Upgrade and Maintenance Manual 109
Hard disk drives / solid state drives
7.1.2 Configuration with up to four HDD/SSD modules
Figure 39: Equipping the four HDD/SSD bays
SAS connectivity
HDD/SSD naming scheme
I The HDD/SSD numbering as listed in the ServerView RAID Manager
differs from the HDD/SSD mounting order:
7.1.3 Configuration with up to eight HDD/SSD modules
Figure 40: Equipping the eight HDD/SSD bays
Controller Channel Connection
SAS controller in slot 4 1 Drives 1, 2, 3, 4
2.5-inch HDDs/SSDs
Bay
RAID
Manager
#
Channel
log.
Drive #
Bay
RAID
Manager
#
Channel
log.
Drive #
1 [0] 102[1] 11
3 [2] 124[3] 13
Table 4: HDD naming scheme