Fujitsu PRIMERGY RX200 S8 - Installing the Front VGA;LAN Module; Concluding Steps

RX200 S8 Upgrade and Maintenance Manual 259
Front panel and front VGA/LAN module
Figure 193: Removing the front VGA connector
Ê Push the front VGA connector inside and remove it.
13.3.6 Installing the front VGA/LAN module
Ê Install the front VGA/LAN module as described in section "Installing the front
VGA/LAN module" on page 250.
13.3.7 Concluding steps
Ê "Installing the riser module 3" on page 61
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83