Fujitsu PRIMERGY RX200 S8 - Removing the Front VGA;LAN Module; Removing the Front Connectors

256 Upgrade and Maintenance Manual RX200 S8
Front panel and front VGA/LAN module
13.3.4 Removing the front VGA/LAN module
Ê Remove the front VGA/LAN module as described in section "Removing the
front VGA/LAN module" on page 246.
13.3.5 Removing the front connectors
Removing the front LAN connector
Figure 188: Taking out the front LAN cable
Ê Take the front LAN cable out of the guidings (A).
Ê Turn the front VGA/LAN module around.