RX200 S8
Upgrade and Maintenance Manual 221
Processors
11.2.5 Installing two additional fan modules
Figure 149: Removing sponges
Ê Remove the two sponges from the system fan bays "FAN 7/8" and "FAN
9/10".
Figure 150: Installed fan modules
Ê Install two fan modules in the system fan bays "FAN 7/8" and "FAN 9/10" as
described in section "Installing the new fan module" on page 134.
11.2.6 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
To Next Page
Loading...
