Fujitsu PRIMERGY RX200 S8 - Connecting the FBU Cable to the FBU; Installing the FBU with the Holder

180 Upgrade and Maintenance Manual RX200 S8
Expansion cards and backup units
9.5.3.4 Connecting the FBU cable to the FBU
I The FBU cable is available in different length. You need the short cable
if the used RAID controller is installed in slot 4.
Figure 118: Connecting the FBU cable
Ê Connect the FBU cable to the FBU.
9.5.3.5 Installing the FBU with the holder
Figure 119: Position of the shoulder screw caps