RX200 S8
Upgrade and Maintenance Manual 231
Processors
11.3.6 Installing the heat sink
I Processors with 135W need dedicated heat sinks (part number V26898-
B964-V3).
Figure 163: Installing the heat sink
Ê Align the heat sink and fit it on the processor socket.
Ê Position the screws in the holes carefully, making sure they are upright.
V CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes.
– Ensure that the heat sink cooling fins match the direction of the
airflow (see airflow label)!
Ê Fasten it in a crossover pattern with four screws according to the numbering
(torque 1.0 Nm, the description of this torque value doesn't apply to the
Japanese market.)
To Next Page
Loading...
