RX200 S8
Upgrade and Maintenance Manual 163
Expansion cards and backup units
Figure 98: Removing the expansion card - slot 4
Ê Take the expansion card from the distance holder (1).
Ê Pull out the expansion card from the riser card slot (2).
9.4.4.3 Concluding steps
Ê "Installing the riser module 3" on page 61
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
To Next Page
Loading...
Need help?
General