Fujitsu PRIMERGY RX200 S8 - Installing a 2.5-inch HDD;SSD Module

110 Upgrade and Maintenance Manual RX200 S8
Hard disk drives / solid state drives
SAS connectivity
HDD/SSD naming scheme
I The HDD/SSD numbering as listed in the ServerView RAID Manager
differs from the HDD/SSD mounting order:
7.2 Installing a 2.5-inch HDD/SSD module
7.2.1 Preliminary steps
No steps needed.
Controller Channel Connection
SAS controller in slot 4
1 Drives 1, 2, 3, 4
2 Drives 5, 6, 7, 8
2.5-inch HDDs/SSDs
Bay
RAID
Manager
#
Channel
log.
Drive #
Bay
RAID
Manager
#
Channel
log.
Drive #
1 [0] 102[1] 11
3 [2] 124[3] 13
5 [4] 246[5] 25
7 [6] 268[7] 27
Table 5: HDD naming scheme
Customer Replaceable Unit
(CRU)
Hardware: 5 minutes
Tools: tool-less