RX200 S8
Upgrade and Maintenance Manual 283
System board and components
Figure 216: Position on the system board
Figure 217: Installing the UFM
Ê Connect the UFM to the system board. The UFM spacer must click into the
hole on the system board.
15.3.1.3 Concluding steps
Ê "Installing the riser module 3" on page 61
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
To Next Page
Loading...
