RX200 S8
Upgrade and Maintenance Manual 245
13 Front panel and front VGA/LAN
module
Safety notes
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 31.
13.1 Basic information
– Front VGA/LAN module
The front VGA/LAN module offers a VGA connector and/or a LAN connector
on the front side of the server.
The LAN connector can be used as LAN management connector.
The customer can order the options front VGA and front LAN both or
separately.
– Front panel
The front panel module consists of the front panel board, a front panel and
a holder. These components are already pre-assembled.
The PRIMERGY RX200 S8 server’s chassis ID is stored on both the front
panel board and the system board. After replacing the front panel module, it
is necessary to program the ChassisID prom of the front panel board.
Beside the CPU temperature sensor and housing temperature sensor
provided on the system board, an ambient temperature sensor is also
included on the front panel board. In case of a defective ambient
temperature sensor, please replace the front panel module.
To Next Page
Loading...
